planning

Do you have a feasible project?

Business, Operations / By

Is your project feasible?

The best way to find out whether your project is feasible is to complete a Feasibility Study. This process helps you gain confidence that the solution you need to build can be implemented on time and under budget. So here’s how to do it in 5 simple steps…
Completing a Feasibility Study
A Feasibility Study needs to be completed as early in the Project Life Cycle as possible. The best time to complete it is when you have identified a range of different alternative solutions and you need to know which solution is the most feasible to implement. Here’s how to do it…
Step 1: Research the Business Drivers
In most cases, your project is being driven by a problem in the business. These problems are called “business drivers” and you need to have a clear understanding of what they are, as part of your Feasibility Study.
For instance, the business driver might be that an IT system is outdated and is causing customer complaints, or that two businesses need to merge because of an acquisition. Regardless of the business driver, you need to get to the bottom of it so you fully understand the reasons why the project has been kicked off.
Find out why the business driver is important to the business, and why it’s critical that the project delivers a solution to it within a specified timeframe. Then find out what the impact will be to the business, if the project slips.
Step 2: Confirm the Alternative Solutions
Now you have a clear understanding of the business problem that the project addresses, you need to understand the alternative solutions available.
If it’s an IT system that is outdated, then your alternative solutions might include redeveloping the existing system, replacing it or merging it with another system.
Only with a clear understanding of the alternative solutions to the business problem, can you progress with the Feasibility Study.
Step 3: Determine the Feasibility
You now need to identify the feasibility of each solution. The question to ask of each alternative solution is “can we deliver it on time and under budget?”
To answer this question, you need to use a variety of methods to assess the feasibility of each solution. Here are some examples of ways you can assess feasibility:

  • Research: Perform online research to see if other companies have implemented the same solutions and how they got on.
  • Prototyping: Identify the part of the solution that has the highest risk, and then build a sample of it to see if it’s possible to create.
  • Time-boxing: Complete some of the tasks in your project plan and measure how long it took vs. planned. If you delivered it on time, then you know that your planning is quite accurate.

Step 4: Choose a Preferred Solution
With the feasibility of each alternative solution known, the next step is to select a preferred solution to be delivered by your project. Choose the solution that; is most feasible to implement, has the lowest risk, and you have the highest confidence of delivering.
You’ve now chosen a solution to a known business problem, and you have a high degree of confidence that you can deliver that solution on time and under budget, as part of the project.
Step 5:
It’s now time to take your chosen solution and reassess its feasibility at a lower level. List all of the tasks that are needed to complete the solution. Then run those tasks by your team to see how long they think it will take to complete them. Add all of the tasks and timeframes to a project plan to see if you can do it all within the project deadline. Then ask your team to identify the highest risk tasks and get them to investigate them further to check that they are achievable. Use the techniques in Step 3 to give you a very high degree of confidence that it’s practically achievable. Then document all of the results in a Feasibility Study.

After completing these 5 steps, get your Feasibility Study approved by your manager so that everyone in the project team has a high degree of confidence that the project can deliver successfully.

How to start off a successful outsource project

1 Comment / outsourcing / By

How to start off a successful outsource project

1.0 Know what you want

There must be clear scoping of the demand and what is being put to the market. The objectives for the outsourcing must be consistent and reasonable – cost reduction, as an aim together with increase service may be inconsistent. Sign off internally why you are doing this and agree what is driving the whole process – this is important from the vendors perspective as well. If the vendor knows that cost reduction or technology refresh are key objectives the response can be tailored to your precise needs. Furthermore, objectives can change over time and the original case for an Outsource can be undermined by events. Revisiting the rationale you agreed internally is an important task during the process – don’t be driven by the running train take a time out to check you still need to do this.

2.0 Put in place a clear process.

Decide whether you are asking for a sole source versus competitive bid from the market. Sole sourcing is usually suggested (particularly by the vendor) if there is a history with the supplier and there is a time constraint – but there are significant negatives. Loss of leverage, not being able to compare alternatives, less aggressive pricing to name but three – and a sole source could have high impacts such as the legitimacy of the deal. Last but not least, the process may actually take longer as there is no time pressure that comes from a competitive environment.

In a competitive bid position cost savings have a better chance of being realised and new suppliers can come with more innovative proposals than the in-house incumbent – at least in principle. The process can actually be quicker as the client can drive the competitive process – by a strict time based approach to the process for example. But on the other hand competitive bidding is more resource intensive, for the supplier as well as the client, so make sure you resource well.

Be precise, not prescriptive, comprehensive but concise in the layout – focus on key objectives. We need the ‘what’ not the how – avoid laying down all sorts of preconditions about how the service is to be delivered – that’s the suppliers job in the proposal. I have seen in several RFP’ s detailed specifications of what packages to use and how precisely the service is to be delivered – effectively closing off all innovative solutions that may have been available from the vendor. Also specific demands will drive up the cost – the vendor may be able to offer off-the-shelf solutions that will work just as well as your specific demands but at very favourable rates.

A request for informartion (RFI) is a high-level document inviting a general response and can be used as a test for possible solutions and to pre-select candidates for the bid. Usually there is no bid price given by the suppliers – nor should we expect too much detail here. An request for proposal (RFP) invites a formal response and takes longer for the vendor and the customer to evaluate. In a large bid this cost can come to millions of dollars so make sure before you issue a RFP you really mean to go ahead. Ensure you are being realistic in your demands and take care that the quality and clarity in the RFP promotes conformance in the proposals received.

3.0 Manage the Communication Channels

In negotiation avoid shortcuts and set specific goals – and ensure they are delivered. Evaluate, clarify and frame negotiations to keep competition alive. Document all discussions and carry out frequent self-assessment. Use a term sheet as this helps drive and track the discussion and allows apples to apples comparison – over time the term sheet can evolve into a contract so it is well worth the effort to create one.

Manage the up and down communication channels carefully. Make sure no seniors speak to vendors and control vendor access to senior management carefully. Some vendors are good at getting around the formal process to the senior management and exploiting this access to short-circuit the tender process. We all know of ‘golf course’ deals that cut through a bid process and enable vendors to return to the customer team informing them they ‘know’ the requirements of senior management. Most golf course deals end in disaster so should be avoided like the plague.

Keep talking to vendors and meet frequently to discuss the proposals – the more open and interactive the better the eventual outcome will be.

4.0 Cover the Details

First of all vendors to this for a living – often the vendor sales team have been doing this for years and when this is done will move onto the next. The customer side on the other hand may have not done this before or at least the team carrying out the supplier proposal evaluation may be completely new compared to the last time the outsource process was done. Also some of the customer team will have a day job to contend with – don’t forget this (or holidays etc.) and plan capacities well. Plan well, resource well and set realistic time scales – time pressure can act in the vendor’s favour and allow skipping of important details.

Never let issues that should be solved at negotiation drift into ‘we will solve this later’ discussions. They never are and these can be a source of major conflict later. A trade union official some time ago told me: ‘It is better for the negotiation to break down rather than the agreement’. All-important details must be cleared before signing a contract.

Partnership rhetoric will appear at some stage in the discussions from the vendor side. Partnership usually means giving all the risks to the vendor from the customer side or closing out competition from the vendor side (sole sourcing). Partnership can be invoked to get over tricky points and put them off until later stages or to close out competition. Partnership should be based on performance and strict business principles not waffle. I know it is often said we can handle the things we forgot later in a change process – I have personally never found this to be free of major problems and cost – so beware of this.

Final point maximum gain minimum vendor pain during the proposal stage – and remember to ask yourself what you are looking for from outsourcing until you know what it is!

Royston

How to cold call a client effectively – the road-map to success

Operations / By

Effective Cold Calling

Cold-calling a client is often regarded as the equivalent of clutching at straws in terms of generating business – and research has shown that out of all prospecting methods, cold-calling is the least effective. The perceived wisdom against cold-calling states that it’s effectiveness disappeared when society moved into the Information Age and many sales gurus will state that cold-calling has not only become obsolete, inefficient, and ineffective it is actually counter-productive. Generating high levels of sales resistance as it often offends qualified prospects who may have otherwise bought had they been approached in a more professional manner.

For sure cold-calling is not for every sales team or every product or service, but for certain services, cold-calling is very effective in finding prospects willing and able to purchase and is an extremely effective prospecting tool. Because cold-calling, making an unsolicited business approach, either door stepping or by phoning, just like spamming, is surprisingly successful if done well and above all is targeted and qualified.

The general principles of selling apply equally to cold-calling and as in a normal sales call it is about building a business relationship around a mutually defined need. A financial salesman once told me that when he called ten clients and closed a deal on the last one for one thousand dollars each one of those calls was actually worth to him a Texas penny. That’s the way he looked at it. Rather than nine rejections each call was regarded as a success and precursor to the successful last one where the deal was made. However even against this positive outlook such an approach that rationalises the process as a numbers game and reduces the sales engagement to the equivalent of junk mail in the end will lead no-where.

The following are my top tips for being successful in your prospecting

Homework:

Firstly identify your market for your product or services then target buyers in that market – first base is getting to know to whom you will be talking to. Narrow the search and get an up to date list of potential clients along with contacts phone numbers etc. Be aware that your current clients competitors are a good starting point for new engagements.

Invest time in research about your potential clients The sales team need to be encouraged to research companies they are going to ‘cold-call,’ so they know something about the company’s business, issues and as a result their potential needs.

Doing the Call:

  1. The objectives of the call is to get the 30 minute appointment or a ‘call to action’ – a follow-up.
  2. Warm up the cold call by sending out a message that you will be calling (but do not say when). A cold call is better used for when you want to make a sale or make an appointment today – ‘I am in your area today so’ .
  3. Craft a good script and more or less stick to it – set down your exit dialogue and leave the door open preferably with a ‘call-to-action’. However customise the delivery and be contingent – the prospect may cut in and go directly to ‘so what can you do for me…’
  4. When starting the call get to the point and be efficient never ask how they are today – it sets of invisible alarm bells and gives them time to think of a response to fob you off.
  5. Smile and be pleasant throughout and you will feel better (and have higher self-esteem) and your client will feel that you are smiling through the inflection in your voice.
  6. Be nice to the gatekeepers and develop standard scripts to the objections they will throw at you. If you meet a new one (objection that is) that you have not heard before write it down and develop a scripted response for the next time it comes up.
  7. When you get to the Principal acknowledge a time limit and stick to it – ‘I know you have only 30 seconds so …’ Ask for the appointment and ask her to write it down.
  8. Do not say you will call a day before to confirm – just turn up at the appointed time. If something really came up in the meantime and you turn up, and the appointment is cancelled, the balance of power shifts in your direction and you should get the return match. Don’t forget to ask for the new appointment.
  9. Get lot’s of practice and develop a thick skin – I am quite serious – practice cold calling on your colleagues and get them to give you a hard time (they will need little encouragement). They will be over the top but never-the-less this will be invaluable training.

Prospecting is the foundation of any company’s sales approach and enables you to hit targets and fill the pipeline – it is the lifeblood of your sales process. Sales prospecting using cold-calling just like fishing requires that you find the fun in the game. What prevents sales people cold calling is often the fear of rejection that an abruptly ended sales call engenders. We need to turn this around – just as when fishing we rue the ten that got away all that is forgotten when we land the big one. Besides what has happened is the client has not rejected you she has lost the chance of a great deal for the short term ego boost that chewing out a sales rep has given her.

Potentially cold-calling is a means of identifying potential prospects for your sales efforts and is the reconnaissance before any battle begins and is an excellent method of qualifying potential leads. Cold-calling is not where the sale happens its where the terrain is identified and the process begins. It must be said that cold-calling is hard work and not particularly effective compared to other techniques such as networking however although the most universally despised aspect of the sales job if done well will pay very rich dividends